I have been anticipating this for a long time now. As you all are aware that I have hardly posted anything over the last one year. I am writing in today to official close the blog. The posts will still be available as an archive to all those who wish to re-visit and read. Thank you for being such great readers all these years.
Oneplus has today released an update for the One CM 11S 05Q which addresses several known issues as well as adds new features like Swiftkey & MaxxAudio by Wave. The complete list of changes can be viewed on the official Forum Page here.
This guide is being written keeping in mind the OnePlus users from India where, CyanogenMOD updates will no longer be released due to the exclusive rights distribution issue between OnePlus & Micromax. All those wishing to manually install the ROM can follow this tutorial. The best part here is that it neither requires Unlocked Bootloader nor a Root Access.
Disclaimer: Although this is a fool proof method of updating which doesn’t involve any unlocking of bootloader or rooting of the device, we do not take any responsibility in case of any issue. Please proceed with the steps below at your own risk.
Download the ROM zip file from the url mentioned above.
Rename the file to update.zip and paste it in the root folder of the device (\A0001\Internal storage)
Next, we need to access the Developer Options on the device. Those who have it already enabled can skip to step 4 others follow on.
To enable Developer Options go to Settings > About Phone
Tap on the “Build Number” text multiple times until a pop notifies that Developer Options have been enabled.
Go to Settings > Developer Options, and turn it on, and ensure that the following items have a check mark against them:
Most Important: Ensure that the battery level is at least 50% before moving to next step to flash the ROM
Press and hold the Power Button to access the Power Menu.
Select “Reboot” > “Recovery” > OK
The phone will now boot into the Recovery Mode.
In the recovery mode, select “Apply Update” > “Choose from Internal Storage” > “0/” > “update.zip”
Do not try to touch the screen until the update is installed and you are taken back to the default Recovery Mode screen.
Samsung has finally rolled out the Android 4.3 update to the Exynos based Samsung Galaxy S4 GT I9500 (International) in India. The updated is of 658.31 MB and apparently brings in the features as posted by SamMobile.
The official change log described in the update is as below. The same can be seen from the screenshot also.
With Samsung abandoning support to the Galaxy S users after having updated the users to Android 2.3.6 almost a year and half ago, all the users were left in a fix as there were no updates being rolled out then. But worry not, here is the support from the CyanogenMOD community. This tutorial is for installing the latest CyanogenMOD Nightly ROM based on Android 4.2.2 Jelly Bean on your Samsung Galaxy S GT I9000 (International Version). CyanogenMod is a free, community built, after-market firmware distribution of Android 4.2 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
To install this ROM, some pre-requisites to be followed are:
Taking the back-up: You can take the back up of only the apps using Astro File Manager or Titanium Backup (Root Users) which are freely available in the android market. If you are hearing the term “Root Users” for the first time, and don’t have the SuperUser app installed on your phone, rest assured, your ROM does not have root access yet.
Also, to take up the backup of SMS and call logs you may use SMS Backup+ which again is freely available in android market. It syncs your call logs and SMS to your Gmail account.
Root users can make a nandroid backup using the Clockworkmod Recovery App.
You need to be using any rooted based ROM in order to carry out a smooth installation of CM10.1
Copy both the package to the internal memory (Internal sd card not the removable one) of the Phone
—Make sure the the device has 100% battery so that, there won’t be any problems during the flashing—
To enter into recovery mode one needs to press the three button combo:
Get into Recovery Mode
Clean Cache and do Factory resetby selecting the wipe data/factory reset and wipe cache partition options. Also, get into the advanced section and use the Wipe Dalvik Cache too.
Install ROM from sdcard. For this enter into the recovery, move to install zip from sdcard using the Volume Up/Down Keys, and click on the Home key to enter. Then select choose zip from sdcard and in the next screen navigate to the ROM file and select it.
Next, move to install zip from sdcard using the Volume Up/Down Keys, and click on the Home key to enter. Then select choose zip from sdcard and in the next screen navigate to the GApps file and install it.
Next, again go to the advanced section and select fix permission.
Once, that is done, reboot/restart the phone and voila! You now have CyanogenMOD 10.1, Jelly Bean on your device!!
All those who are dying to install and try out the New Facebook Home App, but are unfortunately not able to do so because either their device or country not being supported, good news are here!! The modaco.com founder PaulOBrein has patched the Facebook apps so they can be installed on almost any device without rooting them.
For all the people, who have the supported devices but country not being supported:
Install the latest version of Facebook App and Facebook Messenger App from the Google Play Store
Install the Patched Version of Facebook Home from here.
The WordPress.com stats helper monkeys prepared a 2012 annual report for this blog.
Here’s an excerpt:
19,000 people fit into the new Barclays Center to see Jay-Z perform. This blog was viewed about 160,000 times in 2012. If it were a concert at the Barclays Center, it would take about 8 sold-out performances for that many people to see it.